HP P1100 Manual do Utilizador descarregar pdf (Página 110)

Page skew

●

Make sure that the media is loaded correctly and the

media guides are not too tight or too loose against the

media stack.

●

The input bin might be too full.

●

Check the media type and quality.

Curl or wave

●

Check the media type and quality. Both high temperature

and high humidity cause media to curl.

●

The media might have been in the input tray too long.

Turn over the stack of media in the tray. Also, try rotating

the media 180° in the input tray.

●

The fuser temperature might be too high. In the printer

driver, make sure that the appropriate media type is

selected. If the problem persists, select a media type that

uses a lower fuser temperature, such as transparencies or

light media.

Wrinkles or creases

●

Make sure that media is loaded properly.

●

Check the media type and quality.

●

Turn over the stack of media in the tray. Also, try rotating

the media 180° in the input tray.

●

For envelopes, this can be caused by air pockets inside

the envelope. Remove the envelope, flatten the envelope,

and then try printing again.

96 Chapter 8 Solve problems ENWW

1 2 ... 105 106 107 108 109 110 111 112 113 114 115 ... 157 158

Sem comentários

HP P1100 Manual do Utilizador Página 110