HP DesignJet ColorPro CAD Manual do Utilizador descarregar pdf (Página 164)

Removal and Replacement of Parts (without Calibration)7-14

Replacement of Parts

Installing the LCD Panel

Step 1. Install the new LCD panel by fitting it in from the bottom first before pushing it down till it snaps into

place. Make sure the plastic holders secure the LCD panel properly.

Step 2. Latch the wiring back in the plastic hooks neatly.

Step 3. Reinstall the LCD harness and replace the screw securing it.

Step 4. Reconnect both the LCD and LED connectors. Make sure the connectors are correctly secured.

Caution!

Please note that the colors of the wiring of the LCD connector are different from that of the LED

connector. When connecting, please check that the sequences of the colors of the connectors match on

both ends.

Step 5. Replace the remaining components for the LED PCA (refer to the procedures in Installing the LED

PCA from Replacement of LED PCA).

www.GovTechMedia.com

1 2 ... 159 160 161 162 163 164 165 166 167 168 169 ... 261 262

Sem comentários

HP DesignJet ColorPro CAD Manual do Utilizador Página 164