HP DesignJet ColorPro CAD Manual do Utilizador descarregar pdf (Página 195)

Removal and Replacement of Parts (without Calibration) 7-45

Replacement of Parts

Replacement of Absorbers

You will be removing the absorbers from the printer and installing new absorbers.

Removing the Absorbers

Step 1. Remove the Ink Supply Station (refer to

procedures in Removing the Ink Supply

Station from Replace of Ink Supply

Station).

Step 2. Slide the ink carriage mechanism along the

carriage rod to the left under the top cover.

This will expose three screws, previously

concealed under the ink carriage

mechanism, that secure the service station.

Step 3. Unscrew the three screws in the order

shown on the chassis.

Step 4. Remove the service station by sliding it out.

Be careful of connecting cables when

removing the service station.

Step 5. Disconnect the service station connector.

www.GovTechMedia.com

1 2 ... 190 191 192 193 194 195 196 197 198 199 200 ... 261 262

Sem comentários

HP DesignJet ColorPro CAD Manual do Utilizador Página 195