HP FB500 Manual do Utilizador descarregar pdf (Página 75)

4. Lubricate the top carriage-wheel strip from end to end on the rail (moving the carriage to clean

the full length of the rail).

The included oiled rags can be reused until there is no clear surface remaining on the rag (rags

should be replaced quarterly). Clean these surfaces weekly or more frequently, depending on

the amount of debris in the environment.

CAUTION: Do not add additional oil to the lubrication cloths. The cloths are created to

distribute a very thin film of oil. If too much oil is deposited, oil pockets can cause friction with the

carriage wheels, which will produce output anomalies.

Figure 9-13 Top carriage-wheel strip

5. Lubricate behind the top area of the rail where the carriage wheels contact.

Figure 9-14 Back of top carriage-wheel strip

6. Using a lint-free cloth and Printhead Flush, clean the lower carriage-wheel strip from end to end

on the rail (moving the carriage to clean the full length of the rail).

ENWW Clean and lubricate rail strips (bi-weekly) 69

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 101 102

Sem comentários

HP FB500 Manual do Utilizador Página 75