
Control panel lights and display icons status
●
Power button light
●
Printhead icons and Printhead Alert light
●
Printhead priming and alignment icons
●
Error icon, Paper Error icon, and Resume light
●
Number of copies icon
●
Ink system maintenance
Power button light
Status Description
On The printer is on.
O The printer is powered o.
Dimmed Indicates the printer is in Sleep mode. The printer automatically enters Sleep mode after 5 minutes
of inactivity. After 2 hours of inactivity, the printer automatically turns o if not connected to a
computer.
Blinking
The printer is processing a job. To cancel the job, press the Cancel button ( ).
Fast blinking If the printhead access door is open, close it. If the printhead access door is closed and the light is
blinking fast, the printer is in an error state that you can resolve by following the on-screen
messages from the computer. If you do not see any on-screen messages, try printing a document to
generate an on-screen message.
Printhead icons and Printhead Alert light
● The Error icon, one of the Printhead icons, and the Printhead Alert light are blinking.
Cause Solution
One of the following might have occurred.
– The corresponding printhead is missing.
– The corresponding printhead is installed incorrectly.
– The corresponding printhead still has orange plastic tape
or the plug on it.
– If one of the printheads is missing, insert the
corresponding printhead.
– If both printheads are installed in the printer, remove the
corresponding printhead, make sure there is no plug or
plastic tape on it, and then reinsert the printhead
securely.
NOTE: After you have set up the printer, do not open
the printhead latch unless installing new printheads or
moving the printer outside your home or oice.
For more information, see Fix printhead problems
on page 58.
8 Chapter 2 Get started ENWW
Comentários a estes Manuais