HP SN6000 Manual do Utilizador descarregar pdf (Página 57)

HP SAN Connection Manager User Guide 57

The wizard window lists switches selected for firmware update. The list provides the following

information:

• Switch name.

• Current switch firmware version.

• Firmware image file name (this field is blank until you click and complete Select Switch Firmware

File—see step 4).

• Switch administrator password for authentication (this field is blank until you click and complete

Switch Admin Password—see step 6).

• Option to apply the new firmware image right after the update or wait until the next time the switch

is turned off, and then back on. (This field is blank until you click and complete Switch Admin

Password—see step 6).

NOTE: If the switch name and current firmware version shown are not correct, try to get the switch

properties first. For details, see “Viewing switch properties,” page 47.

4. Click Select Switch Firmware File.

5. Navigate to the folder containing the required file for the switch, select the firmware file, and then click

Open.

The Updated FW Image File column shows the file name.

6. Click Switch Admin Password.

The Switch User Name and Password for Firmware Update dialog box (Figure 34) opens.

Figure 34 Switch User Name and Password for Firmware Update dialog box

7. In this dialog box, complete these steps:

a. Enter the user name and password.

b. (Optional) If you want the firmware update to take affect immediately, rather than after the switch

power is recycled, select the Apply the new firmware image immediately after successful update

check box.

c. Click OK.

8. Repeat steps 4 through 7 for each switch you want to update, and then continue with step 9.

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 161 162

Sem comentários

HP SN6000 Manual do Utilizador Página 57