HP SN6000 Manual do Utilizador descarregar pdf (Página 58)

58 Managing Switches

9. On the completed Switch Firmware Update wizard window (Figure 35), click Next.

Figure 35 Switch Firmware Update wizard

10. To complete the wizard, choose one of the following options:

• To confirm and proceed with the firmware update, click Finish.

• To change your selections for the firmware update, click Back.

• To stop the firmware update, click Cancel.

If you clicked Finish, a message may inform you that the switch firmware is ready to be updated. The

process takes several minutes per switch and cannot be canceled. Also, switch traffic may be

temporarily disrupted.

11. Click Yes when prompted to update the switch firmware.

Setting switch SNMP properties

Use the SNMP Properties dialog box to define how authentication traps are managed and set for the

switch. SNMP is the protocol that governs network management and monitoring of network devices. SNMP

security consists of a read community string and a write community string, which are basically the

passwords that control read and write access to the switch.

CAUTION: The read community string public and write community string private are set at the factory to

these well-known defaults and should be changed if SNMP is enabled. If SNMP is enabled (default) and

the read and write community strings have not been changed from their defaults, you risk unwanted access

to the switch. It is very important that you consider how you want to manage the fabric and what switches

you do not want managed through another switch.

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 161 162

Sem comentários

HP SN6000 Manual do Utilizador Página 58