HP Switch 6120 Manual do Utilizador descarregar pdf (Página 160)

100

101

4-23

TACACS+ Authentication

Configuring TACACS+ on the Switch

To delete a per-server encryption key in the switch, re-enter the tacacs-server

host command without the key parameter. For example, if you have

north01

configured as the encryption key for a TACACS+ server with an IP address of

10.28.227.104 and you want to eliminate the key, you would use this command:

ProCurve(config)# tacacs-server host 10.28.227.104

Note You can save the encryption key in a configuration file by entering this

command:

Procurve(config)# tacacs-server key <keystring>

The <keystring> parameter is the encryption key in clear text.

Note The show tacacs command lists the global encryption key, if configured.

However, to view any configured per-server encryption keys, you must use

show config or show config running (if you have made TACACS+ configuration

changes without executing

write mem).

Configuring the Timeout Period. The timeout period specifies how long

the switch waits for a response to an authentication request from a TACACS+

server before either sending a new request to the next server in the switch’s

Server IP Address list or using the local authentication option. For example,

to change the timeout period from 5 seconds (the default) to 3 seconds:

ProCurve(config)# tacacs-server timeout 3

1 2 ... 155 156 157 158 159 160 161 162 163 164 165 ... 468 469

Comentários a estes Manuais

Sem comentários

HP Switch 6120 Manual do Utilizador Página 160

Comentários a estes Manuais

Manuais e produtos relacionados com Software HP Switch 6120