HP Switch 6120 Manual do Utilizador descarregar pdf (Página 72)

100

101

2-29

Configuring Username and Password Security

Front-Panel Security

Disabling the Clear Password Function of the Clear Button

This command displays a Caution message in the CLI. If you want to proceed

with disabling the Clear button, type

[Y]; otherwise type [N]. For example:

Figure 2-11. Example of Disabling the Clear Button and Displaying the New Configuration

Syntax: no front-panel-security password-clear

In the factory-default configuration, pressing the Clear button

on the switch’s front panel erases any local usernames and

passwords configured on the switch. This command disables

the password clear function of the Clear button, so that

pressing it has no effect on any local usernames and

passwords.

(Default: Enabled.)

Note: Although the Clear button does not erase passwords

when disabled, you can still use it with the Reset button

(Reset+Clear) to restore the switch to its factory default

configuration, as described under “Restoring the Factory

Default Configuration” on page 2-25.

Indicates the command has disabled the Clear

button on the switch’s front panel. In this case

the Show command does not include the reset-

on-clear status because it is inoperable while

the Clear Password functionality is disabled, and

must be reconfigured whenever Clear Password

is re-enabled.

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 468 469

Comentários a estes Manuais

Sem comentários

HP Switch 6120 Manual do Utilizador Página 72

Comentários a estes Manuais

Manuais e produtos relacionados com Software HP Switch 6120