HP Switch 6120 Manual do Utilizador descarregar pdf (Página 383)

100

101

10-53

Configuring Port-Based and User-Based Access Control (802.1X)

Displaying 802.1X Configuration, Statistics, and Counters

Figure 10-10.Example of show port-access authenticator Command

The information displayed with the show port-access authenticator command

for individual (config | statistics | session-counters | vlan | clients) options is

described below.

Figure 10-11.Example of show port-access authenticator config Command

Syntax: show port-access authenticator config [port-list]

Displays 802.1X port-access authenticator configuration

settings, including:

• Whether port-access authentication is enabled

• Whether RADIUS-assigned dynamic VLANs are supported

• 802.1X configuration of ports that are enabled as 802.1X

authenticators (For a description of each setting, refer to

the syntax descriptions in “2. Reconfigure Settings for

Port-Access” on page 10-21. Use the show running

command to view the current client-limit configuration

available for switches.)

You can display 802.1X port-access authenticator

configuration for all switch ports or specified ports.

802.1X configuration information for ports that are not

enabled as 802.1X authenticators is not displayed.

ProCurve(config)# show port-access authenticator config

Port Access Authenticator Configuration

Port-access authenticator activated [No] : Yes

Allow RADIUS-assigned dynamic (GVRP) VLANs [No] : No

| Re-auth Access Max Quiet TX Supplicant Server Cntrl

Port | Period Control Reqs Period Timeout Timeout Timeout Dir

---- + ------- -------- ----- ------- -------- ---------- -------- -----

1 | No Auto 2 60 30 30 30 both

2 | No Auto 2 60 30 30 30 in

...

1 2 ... 378 379 380 381 382 383 384 385 386 387 388 ... 468 469

Comentários a estes Manuais

Sem comentários

HP Switch 6120 Manual do Utilizador Página 383

Comentários a estes Manuais

Manuais e produtos relacionados com Software HP Switch 6120