HP Switch 6120 Manual do Utilizador descarregar pdf (Página 180)

100

101

5-13

RADIUS Authentication, Authorization, and Accounting

Configuring the Switch for RADIUS Authentication

Figure 5-3. Example Configuration for RADIUS Authentication

Note If you configure the Login Primary method as local instead of radius (and local

passwords are configured on the switch), then clients connected to your

network can gain access to either the Operator or Manager level without

encountering the RADIUS authentication specified for Enable Primary. Refer

to “Local Authentication Process” on page 5-24.

2. Enable the (Optional) Access Privilege Option

In the default RADIUS operation, the switch automatically admits any authen-

ticated client to the Login (Operator) privilege level, even if the RADIUS server

specifies Enable (Manager) access for that client. Thus, an authenticated user

authorized for the Manager privilege level must authenticate again to change

privilege levels. Using the optional login privilege-mode command overrides

The switch now

allows Telnet and

SSH authentication

only through

RADIUS.

Note: The Webui

access task shown

in this figure is

available only on the

switches covered in

this guide.

1 2 ... 175 176 177 178 179 180 181 182 183 184 185 ... 468 469

Comentários a estes Manuais

Sem comentários

HP Switch 6120 Manual do Utilizador Página 180

Comentários a estes Manuais

Manuais e produtos relacionados com Software HP Switch 6120