HP Switch 6208M-SX Manual do Utilizador descarregar pdf (Página 278)

100

101

Configuring OSPF

ASBR (Autonomous System Border Router)

RIP Domain

OSPF Domain

Figure 8.7 Redistributing OSPF and static routes to RIP routes

USING THE CLI

EXAMPLE:

To configure the HP 9308M routing switch acting as an ASBR in Figure 8.7 to redistribute OSPF, BGP4, and static

routes into RIP, enter the following commands:

HP9300ASBR(config)# router rip

HP9300ASBR(config-rip-router)# permit redistribute 1 all

HP9300ASBR(config-rip-router)# write memory

NOTE: Redistribution is permitted for all routes by default, so the permit redistribute 1 all command in the

example above is shown for clarity but is not required.

You also have the option of specifying import of just OSPF, BGP4, or static routes, as well as specifying that only

routes for a specific network or with a specific cost (metric) be imported, as shown in the command syntax below:

8 - 25

1 2 ... 273 274 275 276 277 278 279 280 281 282 283 ... 709 710

Comentários a estes Manuais

Sem comentários

HP Switch 6208M-SX Manual do Utilizador Página 278

Comentários a estes Manuais

Manuais e produtos relacionados com Software HP Switch 6208M-SX