HP Switch 6208M-SX Manual do Utilizador descarregar pdf (Página 544)

100

101

Configuring SRP

10. Select the track port by selecting a box next to the desired interface. For purposes of this example, you would

select interface 1 as the track port for interface A on router 1.

NOTE: The track port is a physical port that is used to track the status of ports that provide redundant paths.

If the software detects a change in state (up or down), the software increases or decreases the priority of the

SRP Group Interface accordingly.

NOTE: If you are configuring a Chassis device, the track port options are listed in a slot/port combination

(for example, 1/1, which indicates <slot>/<port>), indicating that the port is resident on a module in slot 1 of

the HP 9304M or HP 9308M.

11. Repeat the steps above for each interface that is to be a redundant link. In this example, you would also need

to configure interface B for router 1 and interfaces C and D for router 2.

12. Click the Add button to apply the changes to the device’s running-config file.

13. Select the Save

link at the bottom of the dialog, then select Yes when prompted to save the configuration

change to the startup-config file on the device’s flash memory.

13 - 13

1 2 ... 539 540 541 542 543 544 545 546 547 548 549 ... 709 710

Comentários a estes Manuais

Sem comentários

HP Switch 6208M-SX Manual do Utilizador Página 544

Comentários a estes Manuais

Manuais e produtos relacionados com Software HP Switch 6208M-SX