HP Switch 6208M-SX Manual do Utilizador descarregar pdf (Página 348)

100

101

Configuring IP Multicast Protocols

Modifying Trigger Interval

The Trigger Interval defines how often trigger updates, which reflect changes in the network topology, are sent.

Example changes in a network topology include router up or down or changes in the metric. Possible values are

from 5 – 30 seconds. The default value is 5 seconds.

USING THE CLI

To support the sending of trigger updates every 20 seconds, enter the following:

HP9300(config-dvmrp-router)# trigger-interval 20

Syntax: trigger-interval <5-30>

USING THE WEB MANAGEMENT INTERFACE

1. Log on to the device using a valid user name and password for read-write access.

2. Click on the plus sign next to Configure in the tree view to expand the list of configuration options.

3. Click on the plus sign next to DVMRP in the tree view to expand the list of DVMRP option links.

4. Click on the General

link to display the DVMRP configuration panel.

5. Enter a value from 5 – 30 in the Trigger Interval field.

6. Click the Apply button to save the change to the device’s running-config file.

7. Select the Save

link at the bottom of the dialog. Select Yes when prompted to save the configuration change

to the startup-config file on the device’s flash memory.

Modifying Default Route

This defines the default gateway for IP multicast routing.

USING THE CLI

To define the default gateway for DVMRP, enter the following:

HP9300(config-dvmrp-router)# default-gateway 192.35.4.1

Syntax: default-gateway <ip-addr>

USING THE WEB MANAGEMENT INTERFACE

1. Log on to the device using a valid user name and password for read-write access.

2. Click on the plus sign next to Configure in the tree view to expand the list of configuration options.

3. Click on the plus sign next to DVMRP in the tree view to expand the list of DVMRP option links.

4. Click on the General

link to display the DVMRP configuration panel.

5. Enter the IP address of the default gateway in the Default Route field.

6. Click the Apply button to save the change to the device’s running-config file.

7. Select the Save

link at the bottom of the dialog. Select Yes when prompted to save the configuration change

to the startup-config file on the device’s flash memory.

Modifying DVMRP Interface Parameters

DVMRP global parameters come with preset values. The defaults work well in most networks, but you can modify

the following interface parameters if you need to:

• TTL

• Metric

• Advertising

• Encapsulation

The following paragraphs provide an overview and configuration details for DVMRP global parameters.

9 - 47

1 2 ... 343 344 345 346 347 348 349 350 351 352 353 ... 709 710

Comentários a estes Manuais

Sem comentários

HP Switch 6208M-SX Manual do Utilizador Página 348

Comentários a estes Manuais

Manuais e produtos relacionados com Software HP Switch 6208M-SX