Hp StorageWorks 3000 RAID Array Manual do Utilizador descarregar pdf (Página 56)

3-10 Command Console V2.2 for the RAID Array 3000 (Pedestal and Rack Mount Models) User’s Guide

Compaq Confidential – Need to Know Required

Writer: Bob Young Project: Command Console V2.2 for the RAID Array 3000 (Pedestal and Rack Mount Models) User’s Guide Comments:

Part Number: AA-RBF2C-TE File Name: d-ch3 Using Command Console.doc Last Saved On: 12/5/00 10:20 AM

Establishing a SCSI Connection, Dual Controller

If Client’s host operating system is Windows, you can connect to, monitor and

manage your RA3000 over the SCSI bus.

Before you can connect to your storage subsystem over the SCSI bus, at least

one virtual disk must be configured for each host port. To create the virtual

disks you must use a serial connection to the subsystem. The procedure to

create the virtual disks is summarized as follows:

■ Establish a serial connection to your RAID using the Establishing a

Serial Connection, Dual Controller procedure provided in this User’s

Guide.

■ Create a virtual disk for each host port. See “ Creating a Virtual Disk.”

■ Reboot your system.

■ Start the disk administrator, create the partitions and assign drive letters

for the two virtual disks.

For a dual-controller configuration, to connect over the SCSI bus proceed as

follows:

1. Open the HSZ22 Storage window (Start|Programs|Command

Console|HSZ22 Storage window).

2. When the Connection Dialog box appears, select the SCSI option.

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 125 126

Sem comentários

Hp StorageWorks 3000 RAID Array Manual do Utilizador Página 56