Hp StorageWorks 3000 RAID Array Manual do Utilizador descarregar pdf (Página 72)

3-26 Command Console V2.2 for the RAID Array 3000 (Pedestal and Rack Mount Models) User’s Guide

Compaq Confidential – Need to Know Required

Writer: Bob Young Project: Command Console V2.2 for the RAID Array 3000 (Pedestal and Rack Mount Models) User’s Guide Comments:

Part Number: AA-RBF2C-TE File Name: d-ch3 Using Command Console.doc Last Saved On: 12/5/00 10:20 AM

2. Click the Host Ports tab to display the host port property sheet

(Figure 3– 21).

Figure 3-21. Host ports default settings for dual-controller Windows

3. Set host I/O channel 0 for controller 1 to active.

4. Set host I/O channel 1 for controller 1 to passive.

2. Set the channel 0 target ID for controller 1.

3. Set the channel 1 target ID for controller 2.

4. Set the mode for both controllers to NT.

5. To apply the changes on the Host Ports property sheet, Command

Console restarts the controllers. Make sure that the host ports are

quiescent, then click OK.

NOTE: In Active/Active mode, the system is configured to control one SCSI host port on

each controller. To utilize both controllers, each SCSI port must connect to a host bus

adapter. The two adapters can be in one host system or in two different host systems.

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 125 126

Sem comentários

Hp StorageWorks 3000 RAID Array Manual do Utilizador Página 72