
Figure 63 Typical iSCSI path description string
Table 18 Typica
liSCSIpathdescriptionstring
Unit Description
1
The iSCSI ‘device’ (Note that DEA0: is the pseudo-device associated with the software-based
iSCSI Initiator.)
2
TheiSCSIIQNtargetnamepresentedbythempx100/100b
3
The host name associated with the IPv4 address of the mpx100/100b iSCSI (GE) port presenting
the target
4
TheTCPportnumberofthempx100/100biSCSI(GE)portpresentingthetarget
Displaying path information
To display a brief listing of the characteristics of a specific iSCSI multipath device, issue the command:
SHOW DEVICE /
MULTIPATH device-name
An example of the command is shown in Figure 64.
Figure 64 SHOW DEVIC E / MULTIPATH Example
For more comprehensive information about an iSCSI device, including all available paths, issue the
command:
SHOW DEVICE /FULL device-name
An example of the command is shown in Figure 65.
124
Setting up the iSCSI Initiator for multipathing
Comentários a estes Manuais