Hp ProLiant WS460c Gen8 Graphics Server Blade Manual do Utilizador descarregar pdf (Página 21)

Operations 21

Remove the WS460c Graphics Expansion Blade

1. Power down the workstation blade (on page 14).

2. Remove the workstation blade.

3. Remove the WS460c Graphics Expansion Blade access panel (on page 20).

4. Remove the screws (1) and the front bezel (2).

5. Remove the gasket.

NOTE: A stabilizer/coupler (black) is used when coupling and stabilizing two mezzanine

pass-through cards. For a single mezzanine pass-through card, a stabilizer/coupler (clear)

enables the use of the upper mezzanine slot with other mezzanine cards.

Depending on the number of mezzanine pass-through cards used, select the appropriate

stabilizer/coupler (black or clear). A stabilizer/coupler must always be used when an expansion blade

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 97 98

Blade and Expansion Blade 1
User Guide 1
Contents 3
Contents 4 4
Contents 5 5
Component identification 6
Front panel LEDs and buttons 7
Item Description Status 8
System board components 10
System maintenance switch 11
DIMM slot locations 11
HP c-Class Blade SUV Cable 12
Item Connector Description 13
Operations 14
Remove the workstation blade 15
Remove the access panel 16
Install the access panel 16
Remove the DIMM baffle 17
Remove the SAS controller 18
Install the SAS controller 19
Remove the retaining block 25
Operations 29 29
Operations 30 30
Operations 34 34
Overview 37
Connecting to the network 39
Installing a server blade 40
Completing the configuration 41
Introduction 42
Drive option 42
Processor option 43
Memory options 47
HP SmartMemory 48
DIMM identification 50
Memory configurations 50
Online spare population 52
Installing a DIMM 53
Mezzanine card option 54
FBWC capacitor pack 58
Cabling 64
USB devices 65
Troubleshooting 67
Server mode 68
HP product QuickSpecs 68
HP iLO Management 68
Active Health System 69
Intelligent Provisioning 70
HP Insight Diagnostics 71
HP Service Pack for ProLiant 72
HP ROM-Based Setup Utility 72
Using RBSU 73
Auto-configuration process 73
Boot options 74
Configuring AMP modes 74
Utilities and features 75
ROMPaq utility 76
Automatic Server Recovery 76
Keeping the system current 77
Software and firmware 78
Version control 78
ProLiant servers 78
Battery replacement 80
Regulatory information 81
Electrostatic discharge 82
Specifications 83
Support and other resources 84
Customer Self Repair 86
Reparo feito pelo cliente 88
Acronyms and abbreviations 92
Documentation feedback 94
Index 95 95
Index 96 96
Index 97 97
Index 98 98

Comentários a estes Manuais

Sem comentários

Hp ProLiant WS460c Gen8 Graphics Server Blade Manual do Utilizador Página 21

Comentários a estes Manuais

Manuais e produtos relacionados com Hardware de computador Hp ProLiant WS460c Gen8 Graphics Server Blade