Hp ProLiant WS460c Gen8 Graphics Server Blade Manual do Utilizador Página 40
- Página / 98
- Índice
- RESOLUÇÃO DE PROBLEMAS
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
Setup 40
Two types of interconnect modules are available for HP BladeSystem c-Class enclosures: Pass-Thru modules
and switch modules. For more information about interconnect module options, see the HP website
(http://www.hp.com/go/bladesystem/interconnects).
IMPORTANT: To connect to a network with a Pass-Thru module, always connect the Pass-Thru
module to a network device that supports Gigabit or 10 Gb speed, depending on the
corresponding Pass-Thru model.
Installing a server blade
CAUTION: To prevent improper cooling and thermal damage, do not operate the server blade
enclosure unless all bays are populated with either a component or a blank.
CAUTION: Failure to install the divider in a quadrant when installing half-height blades can
result in damage to the connectors on the server blades.
For the best possible HP BladeSystem and Virtual Connect experience, and to prevent a future reboot, HP
requires updating the Onboard Administrator and Virtual Connect to the correct version before installing an
HP ProLiant Gen8 workstation blade. The version information is located on the tag on the front of the
workstation blade.
For more information on this and other specific firmware and driver requirements, as well as the latest
firmware and driver versions, download the SPP on the HP website
(http://www.hp.com/go/spp/download).
1. Remove the device bay blank.
- Blade and Expansion Blade 1
- User Guide 1
- Contents 3
- Contents 4 4
- Contents 5 5
- Component identification 6
- Front panel LEDs and buttons 7
- Item Description Status 8
- System board components 10
- System maintenance switch 11
- DIMM slot locations 11
- HP c-Class Blade SUV Cable 12
- Item Connector Description 13
- Operations 14
- Remove the workstation blade 15
- Remove the access panel 16
- Install the access panel 16
- Remove the DIMM baffle 17
- Remove the SAS controller 18
- Install the SAS controller 19
- Remove the retaining block 25
- Operations 29 29
- Operations 30 30
- Operations 34 34
- Overview 37
- Connecting to the network 39
- Installing a server blade 40
- Completing the configuration 41
- Introduction 42
- Drive option 42
- Processor option 43
- Memory options 47
- HP SmartMemory 48
- DIMM identification 50
- Memory configurations 50
- Online spare population 52
- Installing a DIMM 53
- Mezzanine card option 54
- FBWC capacitor pack 58
- Cabling 64
- USB devices 65
- Troubleshooting 67
- Server mode 68
- HP product QuickSpecs 68
- HP iLO Management 68
- Active Health System 69
- Intelligent Provisioning 70
- HP Insight Diagnostics 71
- HP Service Pack for ProLiant 72
- HP ROM-Based Setup Utility 72
- Using RBSU 73
- Auto-configuration process 73
- Boot options 74
- Configuring AMP modes 74
- Utilities and features 75
- ROMPaq utility 76
- Automatic Server Recovery 76
- Keeping the system current 77
- Software and firmware 78
- Version control 78
- ProLiant servers 78
- Battery replacement 80
- Regulatory information 81
- Electrostatic discharge 82
- Specifications 83
- Support and other resources 84
- Customer Self Repair 86
- Reparo feito pelo cliente 88
- Acronyms and abbreviations 92
- Documentation feedback 94
- Index 95 95
- Index 96 96
- Index 97 97
- Index 98 98
Manuais e produtos relacionados com Hardware de computador Hp ProLiant WS460c Gen8 Graphics Server Blade
(92 páginas)DeVilbiss COMPACT P2-11 manuály
Uživatelské manuály a uživatelské příručky pro Stříkací barva DeVilbiss COMPACT P2-11.
Poskytujeme 2 manuály pdf DeVilbiss COMPACT P2-11 ke stažení zdarma podle typů dokumentů: Uživatelský manuál, Specifikace
Comentários a estes Manuais