HP CommonIO Products Manual do Utilizador descarregar pdf (Página 142)

PAD Ser vices

Remote PAD Printer Support (x29printd)

Chapter 6142

name Mandatory. This is the name of the programmatic

interface that will be used for call setup. There is no

default for this entry. This name must match the

programmatic access name (also called name) specified

in the x25init X.25 configuration file.

remote_x121 Mandatory (no default). This is the X.121 address of

the PAD device plus the subaddress of the printer. This

address is required for calls to be initiated. Only digits

0 through 9 are legal.

cud Optional. This is the Call User Data (CUD) appended

to the protocol ID (0x01000000) for any call request

packets sent to this printer. Only strings of 12

characters or less are permitted.

cug Optional. This is the Call User Group (CUG) that will

be allowed access to the printer. Only integers are

permitted.

logging Optional (default = 1). This is the logging level used

for each printer device. Printer device logging can be

set to 0, 1, 2, or 3 where the respective values are:

0 – No logging (do not create a log file).

1 – Minimum session error logging.

2 – Error and warning logging.

3 – Error, warning, information, and status logging.

HP recommends logging level 0 or 1 for normal

operation. Logging levels 2 and 3 should only be used

for troubleshooting for short periods of time.

Logging messages for x29printd provide descriptions

of what the messages mean and the actions required to

correct any errors that may occur. The log file is

written to

/var/x25/log/x29printd/[device_name][child_process_id].

reverse_charge Optional (default = disabled). Specifies the reverse

charge option for the call setup for the particular

printer address. It can be disabled (or disable),

enabled (or enable).

1 2 ... 137 138 139 140 141 142 143 144 145 146 147 ... 260 261

Sem comentários

HP CommonIO Products Manual do Utilizador Página 142