© Copyright 2013 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for
HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as
constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.
May 2013
Q Is there a problem with curing media at the edges of the roll?
The new curing modules have a consistent temperature across the zone which means there is much better performance
and you should not expect any problems with curing on the edges of the media.
Q What is the printer’s robustness like, does it move around when printing?
The printer is very stable during printing and is reinforced with cross bars to prevent any unnecessary movement. If there is
any minor inertia, this has no found effect on printing quality.
Q What is the lowest and cheapest economy mode I can use for banners? Is it
possible to use 2 pass?
This all depends on the viewing distance and what is acceptable by the end customer. The HP Latex 360 Printer can reach a
maximum speed of 1 pass. However for final production on outdoor applications on banner medias it is recommended to
use a minimum of 4 to 6 passes. A full list of print modes are available in the data sheets or quick demo guides with
recommended viewing distances.
Q Can I print borderless posters (full bleed printing)?
Borderless printing is not recommended by the any of the HP Latex 300 Printer. It is up to the customers own discretion if
they wish to print borderless using the ink collector kit on the HP Latex 360 Printer.
Q On tiled jobs can I print edge to edge without having to cut the panels for
installation for edge to edge (butt) joining?
No, this method of printing is not supported by the HP Latex 360 Printer as the image is slightly over printed so it would not
work for tiling without cutting.
Q Can I print completely unattended if I have a take up roll on my printer?
Yes. The printers can run completely on their own to complete a full roll of media reel to reel. All that you would need to
ensure is that you have enough consumables to last the print job.
Q What substrates can the cutter trim?
The HP Latex 360 Printer is fitted with an on-board x axis cutter. There is a list of substrates that can be cut in the user
guide. The cutter can trim all papers, self-adhesive vinyls and backlits. Banners and textiles cannot be cut and will require
manual trimming.
Q How long does the printer take to start printing (wake up/warm up times)?
The following are the time combinations to ready mode:
Warm up: 1.5 minutes
Wake up and warm up: 3 minutes
Cold start (printer switched off) and warm up: 7 minutes
(2 páginas)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais