© Copyright 2013 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for
HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as
constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.
May 2013
Spindles and media loading
Q What is the minimum substrate width I can use?
For all models it is 254mm (10in). Please note that the minimum travel width of the carriage will be 54in for all substrates
under this size.
Q When should I consider using the edge holders, can I print without them?
In most cases the vacuum on the platen or the tension from take up reel is sufficient enough to print without the use of
edge holders. Edge holders are a tool to help protect the printheads from any unforeseen damage, like printhead crashes
that may occur from certain media types that have the tendency to curl at the edges while printing. Examples of this type of
behaviour can happen in certain papers, or textiles with rugged edges. If at any stage during the printing process you wish
to enable the edge holders, just open the window and slide them into place. Once you close the window, printing will
resume without having to resent the job. Edge holders can also be used when printing with the ink collector kit.
Q Can I use the take up reel without the tension bar?
No. The tension bar must be used at all times when printing with the take up reel. It is there to help prevent any telescoping
and to assist in accurate tension.
Q Are the two spindles identical so I can use them double sided printing by just
swapping them around?
Yes. They are completely identical.
Q Can I attach media to the take up reel while printing to maximize media coverage
Yes. All you need to do is attach the media to the core and enable the appropriate take up reel winding direction. This will
save you approximately 1.5m (4.9 ft.) of media.
Q What is the maximum media thickness that the printer can accommodate?
The maximum tested thickness is 0.5mm.
Q Are the heavy duty spindles for the HP Latex 360 compatible with the HP Latex
330?
Yes. They can be purchased as an accessory.
Q Is the take up reel an upgrade option with the HP Latex 310 model?
Yes. The 54in take up reel can be purchased as an accessory.
(2 páginas)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais