HP B8C95AA Manual do Utilizador descarregar pdf (Página 171)

100

101

HP Designjet T Series — Service Manual 3-63

Service Utilities

2 The Printer will display the current Serial Number and the new Serial

Number of the Printer. Use the Up and Down keys to go through the digits

and press the OK key to go to the next digit. You can press the Cancel key

at any time to exit the utility without making any changes.

If the Serial Number or the Part Number cannot be read, the Front Panel will

display the relevant System Error code. See

System Error Codes - Full

Descriptions on page 2-7.

3 Once the new Serial Number has been entered, the Front Panel will display

the S

erial Number and Model Number of the Printer. Press the OK to

confirm the Serial Number or the Cancel key to exit the utility without

making any changes or the Back key to modify again.

4 If

the utility exits correctly, OK will be displayed on the Front Panel.

5 When the printer is restarted after a serial number change an NVM setting

sequenc

e is initiated to synchronize the serial number stored in the backup

memory.

4. Reset Life Counters

The purpose of this Service Utility is to reset the internal life counters.

There are two submenus that allow you to:

 Reset ALL the counters related to a Preventive Maintenance Kit (PMK).

 Reset only the counters related to a specific replaced part.

ALWAYS RESET THE LIFE COUNTER OF A CORRESPONDING

PART AFTER REPLACING IT.

Perform the Reset Life Counters utility as follows:

1 In the Service Utilities submenu, scroll to Re

set Life Counters and press

OK.

2 Select Reset Maintenance Kit usage to reset the Life Counter for ALL

parts included in a Preventative Maintenance Kit (PMK).

1 2 ... 166 167 168 169 170 171 172 173 174 175 176 ... 489 490

Comentários a estes Manuais

Sem comentários

HP B8C95AA Manual do Utilizador Página 171

Comentários a estes Manuais

Manuais e produtos relacionados com Digitalizar e Imprimir HP B8C95AA