HP B8C95AA Manual do Utilizador descarregar pdf (Página 179)

100

101

HP Designjet T Series — Service Manual 3-71

Service Utilities

7 When the following message appears on the Front Panel, you must select

whether you want to continue and completely erase of the Hard Disk Drive

by pressing Enter. Press Back or Cancel to exit the utility.

8 The erase process starts and the Front Panel shows a setup progress bar.

9 The printer reboots into the Disk Wipe mode, and continues with the disk

erase until it is completed.

Do NOT interrupt this process. All Front Panel buttons are

disabled while printer erases the HDD.

When the process is completed, it will normally be necessary

to update the printer’s firmware with the latest available

version, since the Erase method may have installed an

outdated version of the firmware.

11. SNMP

The purpose of this test is to enable/disable the SNMP counter on the

printer. These counters are required to use the HP pay per use functionality.

1 In the Service Utilities submenu, scroll to "SNMP" and press OK.

1 2 ... 174 175 176 177 178 179 180 181 182 183 184 ... 489 490

Comentários a estes Manuais

Sem comentários

HP B8C95AA Manual do Utilizador Página 179

Comentários a estes Manuais

Manuais e produtos relacionados com Digitalizar e Imprimir HP B8C95AA