HP B8C95AA Manual do Utilizador descarregar pdf (Página 52)

100

101

HP Designjet T Series — Service Manual 1-48

Ink Supplies Troubleshooting

7 Lift the blue handle and pull the Printhead straight up out of the Carriage.

8 To insert a new printhead first remove the orange protective caps.

9 The printhead is designed to prevent you from accidentally inserting it into

the wrong slot. Check that the colored label on the printhead matches the

colored label of the carriage slot into which the printhead is to be inserted.

Insert the printhead slowly and vertically, straight down. It may be damaged

if you insert it too fast, or at an angle, or if you rotate it as you insert it.

10 Ins

ert all other printheads that need to be installed, and close the carriage

cov

er.

11 Close the Window.

12 When all the printheads have been inserted correctly and accepted by the

printer, the printer will beep. If the printer does not beep when you insert the

printhead and the Replace message appears on the front panel display,

the printhead may need to be reinserted.

The front panel display confirms that all

intheads are correctly inserted.

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 489 490

Comentários a estes Manuais

Sem comentários

HP B8C95AA Manual do Utilizador Página 52

Comentários a estes Manuais

Manuais e produtos relacionados com Digitalizar e Imprimir HP B8C95AA