HP 200 Unified Threat Management (UTM) Appliance Series Guia de Início Rápido descarregar pdf (Página 100)

Ste

Command

Remarks

4. Set a daylight saving time

scheme.

• Set a non-recurring scheme:

clock summer-time zone-name

one-off start-time start-date

end-time end-date add-time

• Set a recurring scheme:

clock summer-time zone-name

repeating start-time start-date

end-time end-date add-time

Optional.

Use either command.

By default, daylight saving time is

disabled, and the UTC time zone

applies.

Setting the idle timeout timer in the Web interface

Perform this task to set the idle timeout period for logged-in users. The system logs out a user that is idle

within the specified period.

To set Web idle timeout:

1. Select Device Management > Device Basic > Web Management from the navigation tree to enter

the page shown in Figure 71.

2. Enter the idle timeout.

3. Click Apply.

Figure 71 Web management

Setting the idle timeout timer at the CLI

You can set the idle timeout timer for a logged-in user. After a user logs in to the firewall, if the user does

not perform any operation when the timer expires, the firewall automatically tears down the connection

to the user. If you set this timer to 0, the firewall does not tear down the connection automatically.

To set the idle timeout timer:

Ste

Command

Remarks

1. Enter system view.

system-view N/A

2. Enter user interface view.

user-interface { first-num1

[ last-num1 ] | { aux | console |

vty } first-num2 [ last-num2 ] }

N/A

3. Set the idle timeout timer.

idle-timeout minutes [ seconds ] 10 minutes by default.

1 2 ... 95 96 97 98 99 100 101 102 103 104 105 ... 149 150

Comentários a estes Manuais

Sem comentários

HP 200 Unified Threat Management (UTM) Appliance Series Guia de Início Rápido Página 100

Comentários a estes Manuais

Manuais e produtos relacionados com Software HP 200 Unified Threat Management (UTM) Appliance Series