HP 200 Unified Threat Management (UTM) Appliance Series Guia de Início Rápido Página 30

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
Vista de página 29
24
Configuring password authentication for console login
Ste
p
Command
Remarks
1. Enter system view.
system-view N/A
2. Enter console user interface
view.
user-interface console first-number
[ last-number ]
N/A
3. Enable password
authentication.
authentication-mode password
By default, you can log in to the
device through the console port
without authentication and have
user privilege level 3 after login.
4. Set a password.
set authentication password
{ cipher | simple } password
By default, no password is set.
5. Configure common settings
for console login.
See "Configuring common console
user interface s
ettings (optional)."
Optional.
The next time you attempt to log in through the console port, you must provide the configured login
password.
Configuring scheme authentication for console login
When scheme authentication is used, you can choose to configure the command authorization and
command accounting functions.
If command authorization is enabled, a command is available only if the user has the commensurate user
privilege level and is authorized to use the command by the AAA scheme.
Command accounting allows the HWTACACS server to record all commands executed by users,
regardless of command execution results. This function helps control and monitor user behaviors on the
device. If command accounting is enabled and command authorization is not enabled, every executed
command is recorded on the HWTACACS server. If both command accounting and command
authorization are enabled, only the authorized and executed commands are recorded on the
HWTACACS server.
Follow these guidelines when you configure scheme authentication for console login:
To make the command authorization or command accounting function take effect, apply an
HWTACACS scheme to the intended ISP domain. This scheme must specify the IP address of the
authorization server and other authorization parameters.
If the local authentication scheme is used, use the authorization-attribute level level command in
local user view to set the user privilege level on the device.
If a RADIUS or HWTACACS authentication scheme is used, set the user privilege level on the
RADIUS or HWTACACS server.
To configure scheme authentication for console login:
Ste
p
Command
Remarks
1. Enter system view.
system-view N/A
2. Enter console user interface
view.
user-interface console first-number
[ last-number ]
N/A
Vista de página 29
1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 149 150

Comentários a estes Manuais

Sem comentários