HP 200 Unified Threat Management (UTM) Appliance Series Guia de Início Rápido Página 88

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
Vista de página 87
82
Ste
p
Command
Remarks
4. Configure NAT.
To configure a static NAT mapping:
a. nat static local-ip [ vpn-instance
local-name ] global-ip [ vpn-instance
global-name ]
b. interface interface-type
interface-number
c. nat outbound static
To configure dynamic NAT:
d. interface interface-type
interface-number
e. nat outbound [ acl-number ]
[ address-group group-number
[ vpn-instance vpn-instance-name ]
[ no-pat ] ] [ track vrrp
virtual-router-id ]
Optional.
By default, NAT is not
configured on an interface.
5. Configure the NAT
server.
For normal NAT server:
{ nat server [ Index | acl-number ]
protocol pro-type global
{ global-address | current-interface |
interface interface-type
interface-number } global-port1
global-port2 [ vpn-instance
global-name ] inside local-address1
local-address2 local-port [ vpn-instance
local-name ] [ track vrrp
virtual-router-id ]
{ nat server [ Index | acl-number ]
protocol pro-type global
{ global-address | current-interface |
interface interface-type
interface-number } [ global-port ]
[ vpn-instance global-name ] inside
local-address [ local-port ]
[ vpn-instance local-name ] [ track vrrp
virtual-router-id ]
For ACL-based NAT server:
nat server protocol pro-type global
acl-number inside local-address
[ local-port ] [ vpn-instance local-name ]
Optional.
Configure none or one of the
commands.
6. Assign an IP address to
the interface.
ip address ip-address { mask-length | mask }
[ sub ]
Optional.
By default, GigabitEthernet
0/0 is assigned the IP
address 192.168.0.1/24,
and the other interfaces have
no IP addresses.
7. Return to system view.
quit N/A
8. Enter security zone
view.
zone name zone-name [ id zone-id ] N/A
Vista de página 87
1 2 ... 83 84 85 86 87 88 89 90 91 92 93 ... 149 150

Comentários a estes Manuais

Sem comentários