HP 200 Unified Threat Management (UTM) Appliance Series Guia de Início Rápido descarregar pdf (Página 38)

32

Ste

p

Command

Remarks

3. Enter one or multiple

VTY user interface views.

user-interface vty first-number

[ last-number ]

N/A

4. Enable scheme

authentication.

authentication-mode scheme

Whether local, RADIUS, or

HWTACACS authentication is adopted

depends on the configured AAA

scheme.

By default, local authentication is

adopted.

5. Enable command

authorization.

command authorization

Optional.

By default, command authorization is

disabled. The commands available for

a user only depend on the user

privilege level.

6. Enable command

accounting.

command accounting

Optional.

By default, command accounting is

disabled. The accounting server does

not record the commands executed by

users.

7. Exit to system view.

quit N/A

8. Apply an AAA

authentication scheme to

the intended domain.

a. Enter ISP domain view:

domain domain-name

b. Apply an AAA scheme to

the domain:

authentication default

{ hwtacacs-scheme

hwtacacs-scheme-name

[ local ] | local | none |

radius-scheme

radius-scheme-name

[ local ] }

c. Exit to system view:

quit

Optional.

By default, local authentication is used.

For local authentication, configure

local user accounts.

For RADIUS or HWTACACS

authentication, configure the RADIUS

or HWTACACS scheme on the device

and configure authentication settings

(including the username and

password) on the server.

For more information about AAA

configuration, see Access Control

Configuration Guide.

9. Create a local user and

enter local user view.

local-user user-name

By default, a local user named admin

exists.

10. Set a password.

password { cipher | simple }

password

By default, the password for

system-predefined user admin is

admin, and no password is set for any

other local user.

11. Specify the command

level of the local user.

authorization-attribute level level

Optional.

By default, the command level is 0.

12. Specify Telnet service for

the local user.

service-type telnet

By default, the system-predefined user

admin can use terminal service, Telnet

service, SSH service, and Web service,

and no service type is specified for any

other local user.

13. Exit to system view.

quit N/A

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 149 150

Comentários a estes Manuais

Sem comentários