HP 200 Unified Threat Management (UTM) Appliance Series Guia de Início Rápido descarregar pdf (Página 94)

Figure 66 Setting the time zone

3. Configure the time zone and daylight saving time as described in Table 16.

4. Click Apply.

Table 16 Configuration items

Item Descri

tion

Time Zone Set the time zone for the system.

Adjust clock for

daylight saving

time changes

Adjust the system clock for daylight saving time changes, which means adding one hour to

the current system time.

Click Adjust clock for daylight saving time changes to expand the option, as shown

in Figure 67. Y

ou can configure the daylight saving time changes in the following ways:

• Specify that the daylight saving time starts on a specific date and ends on a specific date.

The time range must be greater than one day and smaller than one year. For example,

configure the daylight saving time to start on August 1st, 2006 at 06:00:00 a.m., and

end on September 1st, 2006 at 06:00:00 a.m.

• Specify that the daylight saving time starts and ends on the corresponding specified days

every year. The time range must be greater than one day and smaller than one year. For

example, configure the daylight saving time to start on the first Monday in August at

06:00:00 a.m., and end on the last Sunday in September at 06:00:00 a.m.

Figure 67 Setting the daylight saving time

Date and time configuration example

In this example, Device A is the firewall.

Network requirements

The local clock of Device A is set as the reference clock, with the stratum of 2. Device B operates in client

mode, and uses Device A as the NTP server.

1 2 ... 89 90 91 92 93 94 95 96 97 98 99 ... 149 150

Sem comentários

HP 200 Unified Threat Management (UTM) Appliance Series Guia de Início Rápido Página 94