HP CloudSystem Foundation Guia do Utilizador descarregar pdf (Página 157)

Cannot add a router with a port using the CloudSystem Portal or the OpenStack

Neutron CLI

Possible cause and recommendationSymptom

The network port settings are incorrect

1. Use one of the following methods to create a network with the correct port settings.

• Using the CloudSystem Portal:

a. Create a network.

b. Create a subnet under the network.

c. Create a router and note the routerId, which will be used as the device-id when

you create a port.

d. Create a port and specify the device-id from step 3 and specify the device owner

as network:router_interface.

e. Verify that the router-interface was created when you see the “Success: Port was

successfully created” message.

• Using the OpenStack Neutron CLI:

a. Create a port with the device_owner attribute set to

network:router_interface, then enter router-interface-add <router>

port=<port-id>.

For example:

# neutron port-create -name port1 --device_owner

network:router_interface -fixed-ip ip_address=IP_ADDR

# neutron router-interface-add <router> port=port1

You see an

Incompatible

type error when you

specify an IP address

for a private or

provider network

router interface

External Network information is not listed on the CloudSystem Portal

Possible cause and recommendationSymptom

The External Network that was automatically created during CloudSystem

Foundation installation has been deleted

You cannot see the

External Network

listed on the Networks

1. On a Windows or Linux workstation where the OpenStack CLI package for CloudSystem

is installed, log on to the management hypervisor on the base appliance.

screen in the

CloudSystem Portal

2. Recreate the External Network by entering this command on the command line:

neutron --insecure net-create 'External Network' --provider:physical_network provider

--provider:network_type vlan --provider:segmentation_id 0 --router:external=True

3. In the CloudSystem Portal, verify that the External Network is listed on the Networks screen

with a VLAN ID as its “Subnets Associated” component.

The External Network has been recreated on the CloudSystem Portal instead

of from the management hypervisor command line

An External Network recreated in the CloudSystem Portal will not have a VLAN ID associated

with it.

You cannot see a

VLAN ID listed for the

External Network on

the Networks screen

in the CloudSystem

Portal

1. In the CloudSystem Portal, delete the External Network that does not have a VLAN ID.

(Admin→Networks→Actions→Delete Network)

2. Verify that there is no External Network listed on the Networks screen.

3. On a Windows or Linux workstation where the OpenStack CLI package for CloudSystem

is installed,log on to the management hypervisor on the base appliance.

4. Create a new External Network by entering this command on the command line:

neutron --insecure net-create 'External Network' --provider:physical_network provider

--provider:network_type vlan --provider:segmentation_id 0 --router:external=True

5. In the CloudSystem Portal, verify that the new External Network is listed on the Networks

screen with a VLAN ID as its “Subnets Associated” component.

Troubleshooting networks 157

1 2 ... 152 153 154 155 156 157 158 159 160 161 162 ... 210 211

Comentários a estes Manuais

Sem comentários

Modelos	Tipo de documento
C20-258	Ficha de datos Conceptronic 2,5" Harddisk Box Mini Violet USB powered, 3 paginas
C05-210	Ficha de datos Conceptronic 3,5 inch USB hard disk box for SATA hard disk, 3 paginas
C05-500	Ficha de datos Conceptronic 2,5 / 3,5 inch hard disk docking station eSATA/USB, 3 paginas
CHD3SATA	Ficha de datos Conceptronic Serial ATA External Hard disk box 3.5 “., 1 paginas
C10-393	Ficha de datos Conceptronic Grab'n'GO 2.5” Hard Disk Box eSATA/USB 2.0, 3 paginas
C05-326	Ficha de datos Conceptronic USB SATA HDD 2.5" BLACK USB powered, 3 paginas
C10-135	Ficha de datos Conceptronic 3,5 inch USB/e-SATA hard disk box, 3 paginas
C05-106	Ficha de datos Conceptronic USB 2.0 & Firewire Harddisk Box 3.5", 1 paginas
C05-324	Ficha de datos Conceptronic 3,5 inch HardDiskBox DualBay, 3 paginas
C20-253	Ficha de datos Conceptronic 2,5" Harddisk Box Mini Blue USB powered, 3 paginas
C05-209	Ficha de datos Conceptronic 2,5 inch USB hard disk box for SATA hard disk, 3 paginas
CHD3U	Ficha de datos Conceptronic USB 2.0 Hard Disk Box 3.5", 1 paginas

HP CloudSystem Foundation Guia do Utilizador Página 157

Comentários a estes Manuais

Conceptronic C20-150 manuales

Conceptronic C20-150 Ficha de datos (3 paginas)

Tabla de contenidos

Más productos y manuales para Hdd / ssd recintos Conceptronic

HP CloudSystem Foundation Guia do Utilizador Página 157

Comentários a estes Manuais

Manuais e produtos relacionados com Software HP CloudSystem Foundation

Conceptronic C20-150 manuales

Conceptronic C20-150 Ficha de datos (3 paginas)

Tabla de contenidos

Más productos y manuales para Hdd / ssd recintos Conceptronic