Hp Unified Extensible Firmware Interface Manual do Utilizador descarregar pdf (Página 49)

Figure 40 QPI Bandwidth Optimization screen

Setting Minimum Processor Idle Power Core State

Select the lowest processor idle power state (C-state) that the operating system uses. The higher

the C-state, the lower the power usage of the idle power state. C6 is the lowest power idle state

supported by the processor. Configure this option only when HP Power Profile is set to “Custom.”

To set minimum processor idle power core state:

1. From the System Utilities screen, select System Configuration→BIOS/Platform Configuration

(RBSU)→Power Management→Advanced Power Options→Minimum Processor Idle Power

Core State and press Enter.

2. Select one of the following options:

• C6 State (default — lowest)

• C3 State

• C1E State

• No C-states

3. Press F10 to save your selection.

Accessing the BIOS/Platform Configuration (RBSU) menu 49

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 157 158

Sem comentários

Hp Unified Extensible Firmware Interface Manual do Utilizador Página 49