Hp Unified Extensible Firmware Interface Manual do Utilizador descarregar pdf (Página 51)

Figure 42 Advanced Power Management — Minimum Processor Idle Power Package State screen

Setting Energy/Performance Bias

Configure several processor subsystems to optimize the processor’s performance and power usage.

Configure this option only if the HP Power Profile is set to “Custom.”

To set energy/performance bias:

1. From the System Utilities screen, select System Configuration→BIOS/Platform Configuration

(RBSU)→Power Management→Advanced Power Options→Energy/Performance Bias and

press Enter.

2. Select one of the following options:

• Maximum Performance—Provides the highest performance and lowest latency. Only use

this option for environments that are not sensitive to power consumption.

• Balanced Performance (default)—Provides optimum power efficiency and is recommended

for most environments.

• Balanced Power—Provides optimum power efficiency based on server utilization.

• Power Savings Mode—For environments that are power sensitive and can accept reduced

performance.

3. Press F10 to save your selection.

Accessing the BIOS/Platform Configuration (RBSU) menu 51

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 157 158

Sem comentários

Hp Unified Extensible Firmware Interface Manual do Utilizador Página 51