Hp Unified Extensible Firmware Interface Manual do Utilizador descarregar pdf (Página 55)

Setting ACPI SLIT Preferences

The ACPI SLIT (System Locality Information Table) describes the relative access times between

processors, memory subsystems, and I/O subsystems. Operating systems that support the SLIT can

use this information to improve performance by allocating resources and workloads more efficiently.

To set ACPI SLIT Preferences:

1. From the System Utilities screen, select System Configuration→BIOS/Platform Configuration

(RBSU)→Power Management→Advanced Power Options→ACPI SLIT Preferences and press

Enter.

2. Select one of the following options:

• Enabled

• Disabled (default)

3. Press F10 to save your selection.

Figure 45 Advanced Power Management — ACPI SLIT Preferences screen

Setting Embedded and Add-in Devices

Enable or disable embedded and add-in devices. Disabling devices re-allocates the resources

(memory, I/O, and ROM space and power) that are normally allocated to the device.

By default, all devices are enabled.

To set embedded and add-in devices:

1. From the System Utilities screen, select System Configuration→BIOS/Platform Configuration

(RBSU)→PCI Device Enabled/Disable and press Enter.

2. Select a device on the system from the list and press Enter.

3. Select either Enable or Disable and press Enter.

4. Press F10 to save your selection.

Accessing the BIOS/Platform Configuration (RBSU) menu 55

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 157 158

Sem comentários

Hp Unified Extensible Firmware Interface Manual do Utilizador Página 55