Hp StorageWorks 1510i Modular Smart Array Manual do Utilizador Página 17
- Página / 99
- Índice
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
2. Disable DHCP.
a. With Network Settings displayed and blinking, press > to select it.
b. Press ^ or v until DHCP Enabled is displayed and blinking, and then press > to select it.
c. Press ^ or v to change the setting to No.
d. Press < to accept the new setting and return to the initial management menu display.
3. Change the IP address.
a. With Network Settings displayed and blinking, press > to select it.
b. Press ^ or v until IP Address is displayed and blinking, and then press > to select it.
c. Press ^ or v to scroll through and select the value for each digit of the IP address.
d. After entering all digits of the new IP address, press < to accept the new setting and return to the
initial management menu display.
4. Verify and, if necessary, change the Subnet Mask, Default Gateway, Primary DNS, Secondary DNS,
and VLAN ID using procedures similar to those outlined in step 3, but pressing ^ or v to navigate
to the desired menu option.
5. After all changes are entered, exit the management menu.
Press v until Exit is displayed and blinking, and then press >.
The LCD panel returns to the display mode.
6. Verify that the IP address was entered correctly by pressing ^ or v until the Port #MA0 IP message
is displayed.
7. Verify that the server can locate the MSA1510i by opening a command prompt window and using
the ping command.
Best prac
tices
• Go to the HP storage website: http://www.hp.com/storage foryourarraycontroller.Product
website
s are updated to include the latest:
• Hardware, firmware, and driver compatibility information.
•Firmwareand/orsoftware.
•System
documentation.
• Use provided installation documents to gather items required for your installation, learn about the
installation process, and physically install devices.
• Record
information about your system in provided checklists and worksheets. This information
is needed when configuring the storage, entering connection information, and setting up
multipathing; and for future configuration changes, reference, and troubleshooting purposes.
• Sign up with Subscriber's Choice to receive e-mail notifications and alerts about your HP devices:
h
ttp://www.hp.com/go/e-updates.
• Sepa
rate management traffic from iSCSI storage traffic. Provide separate physical LANs or create
Virt
ual LANs (VLANs) to segment the traffic.
• Ensure that initiators and targets are on the same Layer 2 Ethernet LAN. This guarantees the
integrity of the data traffic and maintains high network performance levels.
• Ensure the availability of the storage:
•Pro
vide redundant power sources—Plug the two power supplies on the device into separate
Un
interruptible Power Supplies (UPS) on separate sources of power. If you have only one UPS,
maintain separate power paths by plugging one power supply to the UPS on one power
source and plug the other power supply to a separate power source.
•Pr
ovide redundant data paths—Include two separate and isolated iSCSI storage networks
an
d the associated hardware (switches, MSA controllers, etc.) and software components
HP Storage Management Utility user guide
17
- Part number: 383075–002 1
- Contents 3
- Document con 10
- About this guide 12
- 1Overview 13
- Page descripti 14
- Initial confi guration methods 14
- Accessing the SM 15
- Best prac 17
- 18 Ove rview 18
- Page description 19
- Available tasks 20
- For example, if 23
- 3Configure 25
- Configure 26
- Available task 27
- Sample configur 30
- Fundamental ta 33
- 4. Select Man 34
- Configuring data ports 35
- Configuring hard drives 38
- Creating array 39
- Creating logical drives 41
- Creating the target 43
- Creating target 45
- Assigning porta 46
- Mapping logical 47
- Adding authorized initiators 49
- Security tasks 51
- Setting the SSL certificate 56
- Adding a route (A 58
- Changing 58
- Deleting a component (Delete) 63
- Enabling iSNS discovery 65
- Enabling iSNS d 66
- Setting the pref 67
- 4Wizards 69
- 4. When prompted, click Next 70
- Password 73
- 5Diagnose 77
- Diagnose 78
- Prerequisites 79
- Updating MSA firmware 80
- Updating hard drive firmware 83
- A Storage overview 85
- Fault-tolerance levels 86
- RAID 0—no fau 87
- RAID 1+0—drive mirroring 87
- RAID 6—advanced data guarding 89
- Choosing a RAID level 90
- BIcondescriptions 91
- Icon descriptions 94
Manuais e produtos relacionados com Armazenamento Hp StorageWorks 1510i Modular Smart Array
(64 páginas)© 2020, manymanuals-pt.com. Todos os direitos reservados. | 0.019 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais