Hp StorageWorks 1510i Modular Smart Array Manual do Utilizador descarregar pdf (Página 54)

1. In the SMU,selectStorage System > Canonical Target CHAP Settings.

2. Expand the

CHAP State drop-down box and change the setting to Enabled.

NOTE:

If Canonic

al Target CHAP settings have already been entered, the display is contracted

and protected by a gateway check box. To change existing CHAP settings, clear the Use

Existing CHAP Settings check box. The page expands, allowing access to the settings.

3. Enter the CHAP Secret in the provided spaces.

4. On the server, open the iSCSI initiator software utility. Navigate through the iSCSI utility and enter

the same canonical CHAP secret assigned in the SMU.

Setting up target-speciﬁc initiator-to-target CHAP authentication

Creating a CHAP secret that is unique for each target in the storage system requires two steps:

• Assigning a CHAP secret to each target (Step 1).

• EnteringthesameCHAPsecretintheiSCSIinitiatorsoftware(Step 4).

Conﬁgure

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 98 99

Sem comentários

Hp StorageWorks 1510i Modular Smart Array Manual do Utilizador Página 54