HP AG321A Guia de Início Rápido descarregar pdf (Página 3)

7 Removing the cartridges from the

Libraries

Before installing the Extender, the Libraries must be installed in the rack

rails supplied with the Libraries in adjacent rack locations, one Library

directly above the other.

Skip this step if you do not need to move a Library.

WARNING!

When the Library is moved, any cartridges in the Library can

become dislodged from the magazines and damage the

cartridges and Library robotics. To avoid damaging the Library,

remove the cartridges before moving the Library.

Use the OCP or RMI to open the magazines and remove the tapes from

the Library. The magazines with the tapes in them may also be removed

from the Library.

See the HP StorageWorks MSL2024, MSL4048, and MSL8096 user

and service guide for instructions on opening or removing the magazines.

8 Powering off the Libraries

Press the power button on the front panel to power off each Library.

9 Positioning the Libraries in a rack

Before installing the Library Extender, the two Libraries must be installed

in a rack in the rack rails supplied with the Library and the master Library

must be installed directly above the lower Library in the adjacent rack

location as shown in above. If you do not need to move one or more of

the Libraries, skip to Step 10. Relocating tape drives, page 5

If one or both Libraries are mounted in a tabletop conversion cover,

remove the cover and install the Library in the rack in the rack rails

supplied with the Library. If one or both Libraries needs to be moved in

the rack, remove the Library and its rack rails from the rack and install

the rails and Library in the necessary rack location.

NOTE:

If the Library Extender is near the rear rack door latch, you

might need to move the Libraries to a different rack location to

close and latch the rack doors.

Removing a Library from a rack or tabletop

conversion cover

11403

TBAo H

Unplug the power cord from the wall outlet. Remove the power cord

from the Library.

Remove all other cables from the Library.

Page 3

1 2 3 4 5 6 7 8 ... 11 12

Sem comentários

HP AG321A Guia de Início Rápido Página 3