HP AG321A Guia de Início Rápido descarregar pdf (Página 8)

17 Configuring the extended library

The extended library appears to the host as a single library. The upper

Library is always the master Library.

Default settings

Default for the extended librarySetting

Retained from the master LibraryAdministrator password

All mailslots are disabledMailslot configuration

Retained from the master LibraryNetwork settings

Retained from the master LibraryBarcode format reporting

Reserved slots are set to 0Reserved slots

Lowest physical drive in the extended

library

SCSI master drive

Retained by both Libraries.SCSI tape drive addresses

Retained by both Libraries.Contrast setting (MSL4048

and MSL8096)

AutomaticLibrary mode

NoAutoload

NoLoop

Retained from the master Library. The

lower Library is synchronized with the

master Library with every command in

the extended library.

Date and time

All tape drives are powered on.Drive power

Retained from master LibraryAuto clean

Retained from the master Library. If SN-

MP is not configured for the master Lib-

rary but is configured for the lower Lib-

rary, the extended Library takes the set-

tings from the lower Library.

SNMP

Retained from the master LibraryAllow magazine access

without a password

Retained from the master LibraryIgnore barcode media ID

Enabled if encryption is enabled in either

Library otherwise disabled.

Encryption

Disabled

Logical libraries (partition-

ing)

Reserved slots

Reserved slots can be accessed by the RMI or OCP, but are invisible to

the host and backup software. For example, you might keep a cleaning

cartridge in a reserved slot if your backup software does not manage

the cleaning process.

The maximum number of reserved slots is the total number of storage

slots minus 2. For example, an extended library with two MSL4048

Libraries has 96 storage slots, allowing a maximum of 94 reserved slots.

18 Verifying the installation

To verify the installation, run the wellness test from the OCP Support >

Run Tests screen. The wellness test will exercise all Library and drive

functionality for the extended Library. Access to this test requires the

administrator password.

Helpful websites

For other product information, see the following websites:

ttp://www.hp.com/go/ebs

http://www.hp.com/go/tape

http://www.hp.com/go/storage

http://www.hp.com/support

http://www.hp.com/support/mslg3tstree

http://www.hp.com/support/TapeTools

http://www.docs.hp.com

http://www.hp.com

HP technical support

Telephone numbers for worldwide technical support are listed on the HP

support website: h

ttp://www.hp.com/support.

Collect the following information before calling:

• Technical support registration number (if applicable)

• Product serial numbers

• Product model names and numbers

• Applicable error messages

• Operating system type and revision level

• Detailed, specific questions

For continuous quality improvement, calls may be recorded or monitored.

HP strongly recommends that customers sign up online using the

Subscriber's choice website: h

ttp://www.hp.com/go/e-updates.

Subscribing to this service provides you with e-mail updates on the latest

product enhancements, newest versions of drivers, and firmware

documentation updates as well as instant access to numerous other

product resources.

After signing up, you can quickly locate your products by selecting

Business support and then Storage under Product Category.

Page 8

1 2 3 4 5 6 7 8 9 10 11 12

Comentários a estes Manuais

Sem comentários

HP AG321A Guia de Início Rápido Página 8

Comentários a estes Manuais

Manuais e produtos relacionados com Unidades de fita magnética HP AG321A