HP A6828A Manual do Utilizador descarregar pdf (Página 35)

Installing the A6828A Adapter

Connecting External SCSI Peripherals

Chapter 2 19

Connecting External SCSI Peripherals

The A6828A adapter is capable of communicating with Low Voltage

Differential (LVD) or Single Ended (SE) SCSI devices. LVD allows up to

12m cable lengths with multiple SCSI devices, or 25m point-to-point

connections.

IMPORTANT As stated earlier in this chapter, do not mix LVD SCSI devices with SE

SCSI devices on the bus. If you do so, the entire SCSI bus will change to

SE. This will limit the bus performance to Ultra SCSI (40 MB/s).

Make all external SCSI bus connections to the A6828A adapter with

shielded, 68-pin LVD cables. The connectors on the cable are always

keyed to ensure proper mating.

NOTE No cables or external terminators are shipped with the A6828A adapter.

Cables are usually shipped with the external SCSI devices, and you can

get external terminators for the A6828A HBA by ordering SCSI LVD/SE

terminator (HP product number C2370A).

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 137 138

Sem comentários

HP A6828A Manual do Utilizador Página 35