HP A6828A Manual do Utilizador descarregar pdf (Página 88)

Troubleshooting

Setting and Conﬁrming SCSI Parameters

Chapter 372

The SCSI Command

The SCSI command can be used to display and set SCSI bus parameters

to ensure that the SCSI adapter is compatible with the SCSI devices.

Displaying Transfer Rates

To display the SCSI transfer rate for an adapter using the SCSI

command, use the following syntax:

SCSI rate

bus_number slot_number

where

bus_number

Speciﬁes the number of the bus on which the adapter is

installed.

slot_number

Speciﬁes the number of the slot the adapter is in.

For example:

• To display the SCSI transfer rate for an adapter installed on bus 5

slot 2, issue the following command:

SCSI rate 5 2

The command displays the following output:

PCI device /5.2 = no limit

• To list transfer rates for all the bus and slot numbers, issue the

following command:

SCSI rate

1 2 ... 83 84 85 86 87 88 89 90 91 92 93 ... 137 138

Sem comentários

HP A6828A Manual do Utilizador Página 88