HP A6828A Manual do Utilizador descarregar pdf (Página 91)

Troubleshooting

Setting and Conﬁrming SCSI Parameters

Chapter 3 75

Setting SCSI ID

To set the initiator SCSI ID for an adapter using the SCSI command, use

the following syntax:

SCSI init

bus_number slot_number ID_number

where

bus_number

Speciﬁes the number of the bus on which the adapter is

installed.

slot_number

Speciﬁes the number of the slot the adapter is in.

ID_num

Speciﬁes the adapter’s SCSI ID number.

For example, to set the SCSI ID for an adapter installed on bus 5 slot 2 to

6, issue the following command:

SCSI init526

To display the result, issue the following command:

SCSI init 5 2

The output is as follows:

PCI device /5.2 = 6

1 2 ... 86 87 88 89 90 91 92 93 94 95 96 ... 137 138

Sem comentários

HP A6828A Manual do Utilizador Página 91