HP A6828A Manual do Utilizador descarregar pdf (Página 58)

Installing the A6828A Adapter

Specifying SCSI Parameters

Chapter 242

Path (dec) Initiator ID SCSI Rate Auto Term Bus Width

----------------- ------------ --------- --------- ---------

0/0/10/0/0 7 MAX ON MAX

In this example, the HBA’s bus width is MAX (shown in bold in the

previous listing). As mentioned earlier, this is the ﬁrmware suggested

default setting.

If you want to retain the bus width, type main to go back to the “Main

Menu”.

If you want to change the bus width (for example, because you have

Narrow devices on the SCSI bus and you are having problems with

the connection), go to step c.

c. If you are still in the “Service Menu,” type the following command:

scsi

path

width

new_bus_width

where,

path

is the HBA’s path and

new_bus_width

is what you want

to set the HBA’s bus width to (8, for this example).

Therefore, using the information for the HBA in step b, type the

following:

scsi 6/0/4/0/0 width 8

This changes the HBA’s bus width to 8.

To ensure that the bus width has changed, you can repeat step b to

display the HBA’s bus width.

When you have ﬁxed the problem with the connection, and you want

to change the adapter’s bus width back to MAX, go to step d.

d. If you are still in “Service Menu”, type the following command:

scsi

path

width

new_bus_width

where,

path

is the HBA’s path and

new_bus_width

is what you want

to change the HBA’s bus width to (MAX, for this example).

Therefore, using the information for the HBA in step c above, type the

following:

scsi 0/0/10/0/0 width 0

This changes the HBA’s bus width back to MAX.

To ensure that the bus width has changed, you can repeat step b to

display the HBA’s bus width.

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 137 138

Comentários a estes Manuais

Sem comentários

HP A6828A Manual do Utilizador Página 58

Comentários a estes Manuais

Manuais e produtos relacionados com não HP A6828A