HP Modular Cooling System Manual de Instalação descarregar pdf (Página 24)

Figure 14: Weight distribution on the leveling feet locations in a dual rack configuration

Caution:

To reduce the risk of damage to the casters, make sure that the full weight

of the rack rests on the leveling fee, and not on the casters. The casters are

designed only as an aid in moving the rack into position. They are not

designed to support the weight of the rack, and the casters might become

damaged if relied on to support the rack.

Electrical considerations

The MCS 5042 provides two Walther Procon A5 series AC input connections and ships with two sets

of power cords for connecting to redundant AC power busses, if available. Only one power cord is

necessary for operation. The second cord can be connected to a redundant AC power bus to improve

system availability by protecting against power source failures or accidentally tripped circuit breakers.

Note:

Electrical practices and suggestions in this guide are based on North

American practices. For regions and areas outside North America, local

electrical codes take precedence over North American electrical codes. For

example, HP recommends that the protective ground conductor be green

with yellow stripes. This requirement is a North American directive and

does not override the local code requirements for a region or areas outside

North America.

Weight

385 kg (849 lb)

455 kg (1003 lb)

458 kg (1010 lb)

385 kg (849 lb)

375 kg (827 lb)

457 kg (1007 lb)

375 kg (827 lb)

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 59 60

Sem comentários

HP Modular Cooling System Manual de Instalação Página 24