Hp Integrity NonStop J-Series Manual do Utilizador descarregar pdf (Página 25)

Installing and Configuring the ACL Tape Drive for the

NonStop NS-Series Server

M8605A and M8606A ACL Tape Drive Installation and User’s Guide—546012-002

3-3

Installation

1. Connect one end of the fiber cable to the top Fibre Channel port at the rear of the

tape drive. See Figure 3-2 for the location.

2. Connect the other end of the fiber cable to the Fibre Channel ServerNet adapter

(FCSA) on the NonStop NS-series server. See Figure 3-4

on page 3-5 for the

location.

An LC-LC fiber-optic cable must be used to connect the ACL tape drive to the

FCSA. Figure 3-3

on page 3-4 shows each side of the cable.

Figure 3-2. Tape Drive’s Fibre Channel Port Connection

Table 3-1. Fiber Cables

Connector Fiber Cable Fiber Cable Distance

LC - LC 50/125 µm 2-300 meters (6.56-984.25 feet)

LC - LC 62.5/125 µm 3-150 meters (9.84-492.13 feet)

Fiber Cable

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 79 80

Sem comentários

Hp Integrity NonStop J-Series Manual do Utilizador Página 25