Hp Integrity NonStop J-Series Manual do Utilizador descarregar pdf (Página 64)

Specifications

M8605A and M8606A ACL Tape Drive Installation and User’s Guide—546012-002

A-2

Power

Voltage Limits

The tape drive is capable of using any nominal AC voltage between 100 and 240VAC

power, at 50 or 60 Hz. The machines are capable of powering up and operating without

error from any voltage within the ranges specified:

Frequency Limits

The tape drive is capable of operation at either 50Hz or 60Hz. The machines will

automatically adjust for 50-60Hz primary power operation, without requiring user

intervention or modification.

Power Requirements

The tape drive exhibits a nominal steady state AC power consumption of 192 watts,

and a maximum peak power consumption of 240 watts.

Technical Specifications

This table lists technical specifications for the tape drive.

Table A-2. Power for Tape Drive

Input voltage 100-240 Vac +/- 10% full range

Input frequency 50 - 60 Hz

Input current 1.6 A (Max)

Table A-3. Technical Specifications

Tape format Ultrium generation 4

Tape media Read/Write Ultrium 3/4, Read only Ultrium 2

Cartridge capacity 800 gigabytes native; up to 1.6 terabytes compressed

Data transfer rate Up to 120 megabytes per second native

Up to 240 megabytes per second compressed

Buffer size 128 megabytes

MTBF 250,000 hours

Data access time 53 seconds from beginning of media (average)

Rewind tape speed 7 m/s

Interface Multimode short wave fiber-optic

Plug type LC/LC

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 79 80

Sem comentários

Hp Integrity NonStop J-Series Manual do Utilizador Página 64