HP StorageWorks Edge Switch 2/16 Manual do Utilizador descarregar pdf (Página 123)

edge switch 2/16 product manager user guide 3–31

Configuring the Switch

4. Select one of the following from the drop-down list under the Name field:

• Rx Throughput. An alert will occur if the threshold set for receive throughput

is reached.

• Tx Throughput. An alert will occur if the threshold set for transmit throughput

is reached.

• Rx or Tx Throughput. An alert will occur if the threshold set for either receive

or transmit throughput is reached.

5. Click Next.

A new screen appears with additional parameters. The name configured for the

alert appears at the top of the screen.

(Click Previous to return to the previous screen.)

Figure 3–19: New Threshold Alerts dialog box - second screen

6. Enter a percentage from 1 through 100 for % utilization. When throughput

reaches this percentage of port capacity, a threshold alert will occur.

7. Enter the amount of cumulative minutes in which the % utilization should exist

during the notification interval before an alert is generated. You can also select At

any time if you want an alert to occur whenever the set % utilization is reached.

The valid range is 1 to the interval set in step 8 (following).

8. Enter the interval in minutes in which throughput is measured and threshold

notifications can occur. The valid range is 5 minutes to 70,560 minutes.

1 2 ... 118 119 120 121 122 123 124 125 126 127 128 ... 193 194

Sem comentários

HP StorageWorks Edge Switch 2/16 Manual do Utilizador Página 123