
edge switch 2/16 product manager user guide A–13
Product Manager Messages
The data collection process
failed.
An error occurred in the data
collection process.
Contact support personnel.
The data collection process
has been aborted.
User has ended the data
collection process.
N/A. An informational
message.
The default zone must be
disabled to configure.
The message displays when
the user attempts to change
the operating mode to the
open fabric mode and the
default zone is enabled.
Disable the default zone and
repeat the operation.
The HAFM server is busy
processing a request from
another Product Manager
The HAFM server could not
process the current request
because it is busy handling
a request from another
Product Manager.
Retry the operation later. If
the condition persists,
contact support personnel.
The firmware file is
corrupted.
A firmware file has corrupt
data.
Contact support personnel.
The firmware version
already exists.
Firmware version already
exists in the database.
N/A. An informational
message.
The link to the switch is not
available.
The link from the HAFM
server to the switch is not
available.
Check Ethernet connection.
The maximum number of
address configurations has
been reached.
The maximum number of
saved address
configurations has been
reached.
Delete configurations no
longer needed to allow new
configuration to be saved.
The optical transceiver is
not installed.
No information available for
a port that is not installed.
Ensure the optical
transceiver is installed and
fully seated.
The switch did not accept
the request.
The switch did not handle
the action.
Try action again. If problem
persists, contact your
support representative.
The switch did not respond
in the time allowed.
A time out was reached
waiting for the switch to
respond to the action.
Try action again.
Table A–1: HP StorageWorks Edge Switch 2/16 Product Manager Messages
Message Description Action
Comentários a estes Manuais