HP StorageWorks Edge Switch 2/16 Manual do Utilizador descarregar pdf (Página 144)

5–4 edge switch 2/16 product manager user guide

Using Maintenance Features

• Resets the Ethernet interface on the CTP card, causing the connection to the

HAFM server to drop momentarily. The status icon for the switch in the Product

View will change to a gray square until the connection is reestablished.

• Stops normal switching functions for ports (functions resume after the IPL).

After the IPL:

• All Fabric services databases containing information about current Fabric logins,

name server registrations, and other data remain intact, making the operation

transparent to attached devices.

• The switch returns to the online state, even if it was offline before the operation.

• All ports configured as blocked will remain blocked.

• Modifications made to an active zone set configuration that have not been enabled

will be automatically enabled.

Set Online State

Use the procedure in this section to display the current switch operating state (offline

or online) and change the state as required. Refer to Table 1–1 on page 1-31 for more

information on the switch operating states.

CAUTION: Before setting the switch offline, warn administrators and users currently

operating devices that are attached to the switch that it is going offline and that there

will be a disruption of communications. Make sure administrators of device(s) attached

to ports halt Fibre Channel traffic through the switch.

To set the switch online or offline (depending on current state):

1. Right-click on the switch in the Hardware View and select Set Online State from

the menu or select Set Online State from the Maintenance menu on the menu bar.

One of the following dialog boxes displays, depending on the current operating

state.

Figure 5–3: Set Online State dialog box (Offline)

1 2 ... 139 140 141 142 143 144 145 146 147 148 149 ... 193 194

Sem comentários

HP StorageWorks Edge Switch 2/16 Manual do Utilizador Página 144