
edge switch 2/16 product manager user guide 1–9
Product Manager Overview
Using the Product Manager, you can:
• Back up and restore configuration data.
• Change operating mode between S/390 and open systems modes.
• Clear the system error indicator.
• Configure extended distance buffering for ports.
• Configure Fibre Channel operating parameters for the switch, such as BB_Credit,
R_A_TOV, E_D_TOV, preferred domain ID, switch priority, and rerouting delay.
• Configure individual ports with a port name describing the node attached to the
port.
• Configure keys for new features.
• Configure interoperability mode for open switch fabrics.
• Configure LIN alerts.
• Configure nickname to display instead of WWN for switch and attached nodes.
• Configure Port Binding.
• Configure port addresses (S/390 mode only)
• Configure SNMP trap recipients and community names.
• Configure Open Systems Management Server features (if installed)
• Configure the switch name, location, description, and contact person.
• Control individual Fibre Channel ports by blocking/unblocking operation,
enabling LIN alerts and WWN binding, setting data speeds, and running internal
and external loopback diagnostics.
• Display field replaceable unit (FRU) properties such as the FRU name, physical
position in the switch (chassis slot number), active failed state, part number, and
serial number.
• Display information for individual Fibre Channel ports, such as the port name,
port number, Fibre Channel address, operational state, type of port, and login data.
• Display information on nodes attached to ports.
• Display port performance and statistics.
• Display vital product data for the switch, such as the system name, description,
contact person, location, status, model number, firmware and EC level, and
manufacturer.
Comentários a estes Manuais