HP DL380z Guia do Utilizador descarregar pdf (Página 114)

For more information about the HP RESTful API and the HP RESTful Interface Tool, go to the HP website

http://www.hp.com/support/restfulinterface/docs.

Re-entering the server serial number and product ID

After you replace the system board, you must re-enter the server serial number and the product ID.

1. During the server startup sequence, press the F9 key to access UEFI System Utilities.

2. Select the System Configuration > BIOS/Platform Configuration (RBSU) > Advanced Options >

Advanced System ROM Options > Serial Number, and then press the Enter key.

3. Enter the serial number and press the Enter key. The following message appears:

The serial number should only be modified by qualified service

personnel. This value should always match the serial number located on

the chassis.

4. Press the Enter key to clear the warning.

5. Enter the serial number and press the Enter key.

6. Select Product ID. The following warning appears:

Warning: The Product ID should ONLY be modified by qualified service

personnel. This value should always match the Product ID located on

the chassis.

7. Enter the product ID and press the Enter key.

8. Press the F10 key to confirm exiting System Utilities. The server automatically reboots.

Utilities and features

HP Smart Storage Administrator

HP SSA is a configuration and management tool for HP Smart Array controllers. Starting with HP ProLiant

Gen8 servers, HP SSA replaces ACU with an enhanced GUI and additional configuration features.

HP SSA exists in three interface formats: the HP SSA GUI, the HP SSA CLI, and HP SSA Scripting. Although all

formats provide support for configuration tasks, some of the advanced tasks are available in only one

format.

Some HP SSA features include the following:

●

Supports online array capacity expansion, logical drive extension, assignment of online spares, and

RAID or stripe size migration

●

Suggests the optimal configuration for an unconfigured system

●

Provides diagnostic and SmartSSD Wear Gauge functionality on the Diagnostics tab

●

For supported controllers, provides access to additional features.

For more information about HP SSA, go to the HP website

http://www.hp.com/go/hpssa.

ROMPaq utility

The ROMPaq utility enables you to upgrade the system firmware (BIOS). To upgrade the firmware, insert a

ROMPaq USB Key into an available USB port and boot the system. In addition to ROMPaq, Online Flash

Components for Windows and Linux operating systems are available for updating the system firmware.

106 Chapter 7 Software and configuration utilities

1 2 ... 109 110 111 112 113 114 115 116 117 118 119 ... 132 133

Comentários a estes Manuais

Sem comentários

HP DL380z Guia do Utilizador Página 114

Comentários a estes Manuais

Manuais e produtos relacionados com Servidores HP DL380z